YOUR TRACKS. ONE WORKSPACE.
Virtual DAW
Layer two recordings, find their place, and make a mix.
Browser workspace beta · no audio uploads. Browser saves belong to this account, browser and website address. Download a portable project backup to keep a copy independent of browser storage. Microphone access begins only when you press Record; no generation services.
Keep your project
Not saved in this browser.
Project backups include both decoded tracks, trims, positions, levels and mutes. WAV export below is the finished mix, not an editable project. Undo history is not included in project files.
Recovery drafts
Optional and off when you open a tab. Saves after two seconds without edits, once recording or preview review has finished. Includes kept audio, arrangement, instrument settings and drum grid. Unkept takes and undo history are excluded. Each tab keeps its own draft; named projects are never overwritten. Recovering opens an unsaved project with playback stopped.
Automatic recovery is off. Use Save project and download a portable backup too.
Drafts remain until you remove them or clear browser storage. Storage belongs to this browser and local address; it is not a separate backup. Closing immediately can lose edits that are still pending.
WAV precision applies to mix, region, individual track and aligned stem downloads. 16-bit is the default; 24-bit PCM and 32-bit float retain more of the rendered signal for further editing. Source recordings are unchanged; higher precision cannot restore detail already absent from a source. Clipping checks remain active for every format. No dither is applied. Existing 64 MB export limits apply; higher precision makes larger files.
Aligned stems: all loaded tracks, including muted or non-solo tracks, exported as equal-length processed WAVs with timeline silence, effects and master level. Import each at time zero in another DAW.
Download mix WAV exports one complete pass. Export loop region WAV extracts these start/end times once, with effects, master level and Mute/Solo applied; Loop playback need not be enabled. The region starts at zero in the file. Boundaries round to the nearest sample. No extra fades are added, so a cut through sound may click and is not guaranteed to loop seamlessly. Full-mix clipping checks still apply. Browser playback loops may have a small gap.
Load the practice session or import audio into a track.
Arrangement
Zoom changes only the view and keeps the same center where possible. Scroll horizontally to inspect more of the timeline; Fit timeline returns to the beginning at 1×. Zoom is temporary and stays out of project files and Undo history. Follow playback is optional and off by default; it scrolls horizontally to keep the moving playhead visible. Pause/Stop leave the view in place. Turn follow off to inspect another area while playing. Follow is also temporary.
Grid snapping affects dragging, keyboard movement and committed numeric positions. Alt bypasses snapping for dragging/keyboard movement. Arrow keys move one grid step; Shift moves four. Grid changes do not move existing clips or stretch audio. Tempo is separate from the drum sequencer. Grid lines thin out at wide zoom levels.
Import audio decodes files locally, up to 32 MB and 60 seconds, mono/stereo. Empty tracks load immediately. Loaded tracks ask before replacement, with an optional dry preview that starts only when you press Play. Trim and fades reset; current levels, effects, Mute and Solo stay. Position resets to zero unless you choose to keep it. Undo restores the previous source during this session while history retains it; save a separate copy/backup before replacing to keep that source after reopening. Original files and existing saved projects/backups stay untouched.
Crop to trimmed audio keeps only the selected source samples, reducing project/backup size. Choose a valid trim that leaves out some source audio to enable Crop. Boundaries round to the nearest source sample; sub-sample trims can change by less than one sample at either end. Position, effects, fades and the other track stay in place; trim resets to the new source. Cropping can slightly change resampled playback near cut edges; render to compare. Undo restores the full source during this session while the edit remains in history. Save a separate project copy or backup before cropping to retain excluded audio after reopening. Original files stay untouched.
Remove clip frees a track after confirmation; focus its timeline clip and press Delete for the same action. Undo restores audio and settings while the edit remains in this session’s history. Removing does not change the other track, original files, saved projects or existing backups. Save a separate project copy or backup before removal to keep its audio after reopening.
Drag a clip to move it. With snap off, focus a clip and use Left/Right (0.1 s), Shift + Left/Right (1 s), or Home. Escape cancels a drag. Trim using the source controls below.
Duplicate clip copies a trimmed phrase into the other track and places it immediately after the original. It copies level, effects, Mute and Solo too. Replacing an occupied track asks first; Undo restores it. Reverse trimmed clip makes a reversed copy of the selected source audio, rounded to whole samples; trim resets to that selection. Position and effects stay in place, including fade direction. Undo restores the full source and original trims. Save a project copy first to retain audio outside the trim beyond Undo history. This version has one clip per track.
Split uses source seconds within the trimmed interval, rounded to the nearest sample. The first part stays here; the second goes to the other track at the adjoining timeline position. Existing destination audio requires confirmation. Both parts share the unchanged source; Undo restores both tracks. Outer fades shorten to fit each part and inner fades reset to zero. EQ/reverb process each part separately and may change the sound around the split.
Join adjoining clips combines both trimmed parts into the earlier track and empties the later track after confirmation. Sources must match sample rate/channel count, level, boost, pan, polarity, Mute and Solo, with zero EQ/reverb, low/high cuts and delay/compression off and no inner fades. Outer fades are kept. Trims round to whole samples; clips must touch within one source sample. The joined source is limited to 60 seconds. Save a project copy to retain both full sources beyond Undo history.
After rendering, click the ruler to seek without moving clips. Focus the ruler and use Left/Right (0.1 s), Shift + Left/Right (1 s), Home or End. Seeking while paused stays paused; active playback keeps playing and follows the current loop range. The playhead position is temporary.
Record into a track
Choose a track, then Record microphone. Allow microphone access when asked. Recording stops at 60 seconds. Use headphones when listening to the other track so its sound does not bleed into the microphone. Find microphones asks for permission to show input names, then releases the microphone. Your microphone is never routed to speakers. The existing track stays intact until you keep the take.
Overdubs start from timeline zero and use the other track’s trim, position, boost, level and the master level. Browser/device latency can affect alignment; move the kept clip on the timeline if needed. Recording continues after the backing track ends, up to 60 seconds.
Microphone off. The meter appears during recording and count-in.
Measured before Recording boost or track/master levels. Aim for clear speech below clipping; boost cannot repair a distorted source. Use headphones to prevent backing/click bleed.
Microphone off.
Built-in instrument
Play the keys with your mouse, touch, or the labelled keyboard shortcuts while this panel is focused. No microphone, MIDI device or generation service is needed. Start quietly.
MIDI is disconnected. Connect only when you want to use a controller.
Connect asks the browser for MIDI access without system-exclusive messages. Choose an input and play mode. Synth is the default on every channel. Drum pads mode accepts all channels; mixed mode uses channel 10 for drums and other channels for synth. Drum mapping: 35/36 kick, 38/40 snare, 42/44 closed hi-hat. Each pair uses the same built-in sound; other drum notes are silent. Velocity changes hit volume. Drum hits play once through their short tails; note-off, sustain and pitch bend do not change them. Mode changes, disconnect and All notes off silence live MIDI hits; captured hits keep their natural tails. Choose the mode before recording. The mode is temporary and defaults to Synth in a fresh tab. Synth notes use the current sound and velocity. MIDI pitches are absolute; the on-screen octave setting does not transpose them. Record instrument captures MIDI playing into audio, with the existing eight-voice and 60-second limits. Notes from all channels are accepted. Sustain pedal (CC64) holds released MIDI notes until pedal-up, independently per channel; 0–63 is off and 64–127 is on. Sustained notes count toward the eight-voice limit. Stop, All notes off, input changes and leaving this window clear sustain, so cycle the pedal before playing again. The pitch wheel bends MIDI synth notes by up to two semitones either way on each channel, including sustained notes and release tails. Bends are captured in kept audio. Stop, All notes off, input changes, leaving this window and Reset All Controllers return bend to center; recenter your wheel before playing again. On-screen notes and drum pads are unaffected. RPN range changes, MIDI output and editable MIDI files are not included yet. No device choice or identifiers are saved in projects. Leaving this window releases notes and background notes are ignored. Disconnect or All notes off releases MIDI notes.
Drum pads
Kick (Z), snare (X), hi-hat (V). Pads play one-shot sounds using Instrument volume; synth waveform, octave, envelope and filter do not alter drums. Record instrument captures pads and keys together.
Instrument ready. Audio starts only when you play or record.
Eight simultaneous voices. Instrument takes are up to 60 seconds including release, rendered to audio before Keep. Existing track settings remain; new takes reset trim, timeline position and fades. Controls are fixed during capture. Instrument settings save with the project and portable backups. Reopening restores them silently. Captured notes become audio rather than editable MIDI. All notes off or leaving the window ends held notes.
Drum step sequencer
Build a 16-step bar. Each numbered step is a sixteenth note; bold divisions mark the four beats. Render a preview before replacing any track.
Select steps or load the basic beat.
Patterns use the local kick, snare and hi-hat sounds. Preview adds half a second for drum tails. Keep creates audio, with Undo available; original tracks remain until then. Save project and portable backups preserve the editable grid, tempo, bar count, volume and destination. Keep also creates track audio; changing the grid later does not rewrite a kept take until you render and Keep again.
Your mix
Render after editing to hear and download the same mix.
Download mix WAVStereo mix meters
Render a mix, then press Play to see its levels.
Left
Right
Reads a 50 ms window of the exact rendered WAV at the playback position, including this player’s volume and mute. Peak hold records observed windows. Display stops on pause/Stop and resets for a new render; seeking and loops follow the new position. These are sample levels, not true-peak, loudness (LUFS) or measurements of your device/system volume. No audio routing, microphone or extra audio permission. Meters and peak hold are temporary and stay out of project saves and Undo.
What can this first version do?
Two mono/stereo tracks, up to 60 seconds and 32 MB per imported file. Trim each source, position it up to 60 seconds into the timeline, set levels, boost quiet recordings by up to 36 dB, mute or solo tracks. Solo applies to the rendered mix and WAV export; Mute takes priority. Overdub backing always auditions the other track independently of Solo. Boost changes playback and export without rewriting the recorded source. Turn down boost if a render reports overload. Mixes use 48 kHz stereo WAV at your selected precision, with a maximum timeline of 120 seconds. Delay adds its configured echoes; room reverb adds a half-second tail, included in playback and export within the 120-second limit. At 0 the sound is dry; try 0.15–0.3 for subtle space. Overloaded mixes must be turned down before export.
Cloud projects, editable MIDI tracks and a full effects rack are later milestones. Undo/redo keeps up to 30 local edits, subject to a 128 MB source-audio history limit. Your source files are never overwritten. Browser storage can be cleared or unavailable; a downloaded project backup is a separate recovery copy.